GMT Leg kit (4 Piece)
GMT Leg kit (4 Piece) $199.99
Leg kit for the Garage Maker Table (Welding Required) Kit Includes: 4 x legs 3/16" steel 4 x Feet w 3/8" Mounting holes 4 x Levelling Feet
Tool Caddy - DXF FILES Tool Caddy - DXF FILES
Tool Caddy - DXF FILES $6.00
We all end up with a mess on the bench when we're in the middle of a project.  Grinders, drills, air tools, beaters and welding hoods are all essentials to the job. So we made one central location to hold them all, even the battery charger!  Our Tool Caddy is designed with generous relief notches to allow you to bend this on the edge of your bench, no brake or special tooling is required.  Just download, cut, bend and weld in a few spots to make as many of these as you like. This file is designed to be cut out of 12 ga but you can use 16 ga - 10 ga and still make it work.     Overall Dimensions 18.75" W x 9.25" T x 9.75" D  (Designed to be cut from 12 ga plate) Relief notches for brake free bends   These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.
12 x 12 Ultimate Maker Square - DXF FILES
12 x 12 Ultimate Maker Square - DXF FILES $6.00
It's time to take your shop to the next level with these custom fixtures.  Each one is designed to work with our Ultimate Maker Table and all other tooling/fixtures, so you can make almost anything efficiently in your shop. We have done the work in CAD so you can use this file to make as many fixtures as you need for the rest of your career.  Simply download the file and send it to your plasma or local laser.   Files are designed for a laser with very little tolerance, if cut on a plasma table, holes will be undersized approximately 0.06".  Watch this video for expected results using different plasma settings.   Overall Dimensions 12" x 12" x 3.25" x 1/4" Thick  (Designed to be cut from 1/4" plate) 5/8" holes spaced 2" on center 90 Degree angle with access for welding 135 Degree angle 5/8" pivot hole and arc notch Pipe Stand Slotted faces for precise location on Ultimate Maker Table These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
6 in Riser Block - DXF FILES
6 in Riser Block - DXF FILES $6.00
It's time to take your shop to the next level with these custom fixtures.  Each one is designed to work with our Ultimate Maker Table and all other tooling/fixtures, so you can make almost anything efficiently in your shop. We have done the work in CAD so you can use this file to make as many fixtures as you need for the rest of your career.  Simply download the file and send it to your plasma or local laser.   Files are designed for a laser with very little tolerance if cut on a plasma table, holes will be undersized approximately 0.06".  Watch this video for expected results using different plasma settings.   Overall Dimensions 6" x 6" x 6" x 1/4" Thick  (Designed to be cut from 1/4" plate) 5/8" holes spaced 1" on center   These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
8 in Miter Stop - DXF FILES
8 in Miter Stop - DXF FILES $6.00
It's time to take your shop to the next level with these custom fixtures.  Each one is designed to work with our Ultimate Maker Table and all other tooling/fixtures, so you can make almost anything efficiently in your shop. We have done the work in CAD so you can use this file to make as many fixtures as you need for the rest of your career.  Simply download the file and send it to your plasma or local laser.   Files are designed for a laser with very little tolerance if cut on a plasma table, holes will be undersized approximately 0.06".  Watch this video for expected results using different plasma settings.   Overall Dimensions 8" W x 4.2" T x 1/4" Thick  (Designed to be cut from 1/4" plate) 5/8" pivot hole and arc slot    These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
Anvil Parts - DXF Files
Anvil Parts - DXF Files $3.00
  Make your own Anvil using mild steel plates!  Cut these out of any thickness plate to change the overall width of your anvil.   Overall Height = 6.5" Overall Length = 16" Overall Width = Plate Thickness X 9 These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
Skull of Doom - DXF Files Only
Skull of Doom - DXF Files Only $3.00
Want to make your own 3D Skull of Doom?  We have the DXF files to make it happen.  Cut 2x of each DXF file in the download to create the full skull.  Designed to cut from 12 ga steel with one plate thickness of space between each layer.  PDF of part order coming soon... *The Skull pictured and built in the YouTube video is different from this DXF download.  I did not create that file and can't edit it to make it easy for other people to use.  I had to do some weird scaling tricks to get it to work.  This DXF pack will result in a different skull than the one in the video.
Building Plate - FREE DXF FILES
Building Plate - FREE DXF FILES $0.00
 Use these build plate files with 5/8" all thread for the smoothest assembly possible.  See the video below to see how they are used in the assembly process.  - Plates can be cut from any thickness but 1/4" is the minimum recommended. These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
Sliding Stop - FREE DXF FILES
Sliding Stop - FREE DXF FILES $0.00
It's time to take your shop to the next level with these custom fixtures.  Each one is designed to work with our Ultimate Maker Table and all other tooling/fixtures, so you can make almost anything efficiently in your shop. We have done the work in CAD so you can use this file to make as many fixtures as you need for the rest of your career.  Simply download the file and send it to your plasma or local laser.   Files are designed for a laser with very little tolerance if cut on a plasma table, holes will be undersized approximately 0.06".  Watch this video for expected results using different plasma settings.   Overall Dimensions 6" x 3" x 1/4" Thick  (Designed to be cut from 1/4" plate) 5/8" hole and slot    These are the cut files only, no actual parts will be shipped.  Once you checkout you will be emailed a link to download this file one time.  Please put the file in a safe place so you can use it for years to come.  
Visa Mastercard American Express JCB PayPal